LK-10 LIGHT CAPACITY: Air Cooled for Low Load

You can avoid costly tap water usage for your water cooled equipment with our most compact system, the LK-10. Designed for table top or floor usage this air cooled chiller provides all the features required for temperature control and clean coolant circulation. The unit comes standard with a stainless steel cabinet for easy cleaning and durability.

The LK-10 utilizes an absolutely CFC-free, environmentally-friendly refrigeration system with compressor hot discharge gas bypass bypass which eliminates the need for compressor cycling and maintains process stability. Our optional PID microprocessor controller will improve stability to ±0.1°C and features display of process temperature and setpoint, as well as cooling status. The controller front panel keys may be locked for security. Coolant pressure and level status are also displayed on the front panel. To facilitate computer control and data logging, the LK-10 may also be equipped with a serial communications interface.
FEATURES:

* Digital display temperature controller
* Coolant reservoir low level indication
* Pump discharge pressure gauge
* Pump motor overload
* Circuit protector
* Over temperature shutdown
* Low level shutdown
* Mating connectors provided for all I/O options

THE LK-10 LIGHT CAPACITY CHILLER IS CUSTOMIZABLE:
Please contact Tek-Temp at 800-259-4212 for custom capabilities

 

Model LK-10/2,500 LK-10/4,000
Cooling Capacity @ 20°C        BTU/hr (Watts) 2,500 (733) 4,000 (1,172)
Temperature Range °C +5 to +35°C +5 to +35°C
Temperature Stability ± °C 0.5° 0.5°
Reservoir Volume gallons 0.5 0.5
Pressure
Flow

“R1” Rotary Vane Pump
PSI
GPM
0-80
1
0-80
1
Pressure
Flow

“R2” Rotary Vane Pump
PSI
GPM
0-80
1.8
0-80
1.8
Pressure(MAX)
Flow

“C1 Close-coupled Centrifugal”
PSI
GPM
16
0-4
16
0-4
Power Requirements Volts, Ø, Hz
“P1” Power Req’d 115,1,60 115,1,60
“P2” Power Req’d 208-230/200,1,60/50 208-230/200,1,60/50
Dimensions(inches) W x H x D 13.1 x 15.2 x 20.5 13.1 x 15.2 x 20.5

 

Lockable Casters:  4 casters for ease of portability

Flow Adjustment Valve:  Provides a manual bypass of the pump flow back into the chiller

Flow Switch:  Contact output whether there is flow or no flow

PID Temperature Controller:  Improves temperature stability to ±0.1°C

Pressure Relief Valve:  Provides up to 100% bypass of the pump flow

RS-485 Communications (PID Temperature Controller required)

Stainless Steel and Polymeric Wetted Parts

Temperature Alarm:  Provides a configurable isolated contact output to indicate alarm status; PID Temperature Controller Required